RSS Feed
Knowledgebase : Hardware > Printers
The following settings should be set for all printers:Image Quality: Best Photo Paper Type: Premium Photo Glossy Paper Paper Size: 8x10Doing this as a custom profile named ADAMS is perhaps the easiest way to do this.
LABEL PRINTER SETUP Calibrate printer for labels: * Install ribbon * Install labels * Power printer on * Hold down green button until it flashes four times * Wait for printer to run through calibration * Press green button once to feed l...
Noritsu has released their new Shimon printer driver for the dDP series printers. This driver enables the printer to print at 1000 dpi, which is satisfactory for printing latent prints. Also, this driver qualifies the dDP series printers to be used as ...
During installation and configuration of the Noritsu printer driver, you must define each print size. These print sizes must be defined as landscape settings (i.e., 12 x 18, 12 x 10, 12 x 8, 10 x 8, and 6 x 4). If these parameters are not defined properly...
Problem: Printing from Digital Workplace to the Noritsu works from some machines but not others. Details: * Drivers and printer settings are the same on both the machines where it works and those were it does not. * Anti-virus software is ins...
ZEBRA PRINTER LABEL ADJUSTMENT If the labels in a Zebra label printer are drifting/moving then the guides need to be moved closer to the labels. To do this turn the guide adjuster wheel. See the relevant page [1] from the TLP2824 user manual. Links...